|
xmt2ye (November 30, 1999 at 12:00 am)
gns3cisco.blogspot.com/2011/05/gns3cisco-help-you-pass-your-ccna-ccnp.html
khidir06 (November 30, 1999 at 12:00 am)
fivestars
fromindia2008 (November 30, 1999 at 12:00 am)
Excellent !!!!
caserola23 (November 30, 1999 at 12:00 am)
thank.......
Aurastream22 (November 30, 1999 at 12:00 am)
There is always a frame relay switch between the DTE links when someone talks about Frame Relay. The frame relay switch has the clockrates. They also have the intf-type dce. He only shows you how to configure multi- and point-to-point, which is partial mesh, and a full mesh topology.
ejeangilles (November 30, 1999 at 12:00 am)
So are all the routers directly connected with each other via serial cable or is there a frame relay switch in the equation. Also with commands how come there's no clock rate commands?
ganmanG (November 30, 1999 at 12:00 am)
Thanxx!!!!!!!!!!!!! |
